3030 Profile system for construction

Standard profile in series 30, with basis dimensions 30x30mm and 8mm slot / track width. Medium strength.

Strong alu-profile with basis dimensions 30x60mm, with two tracks on one side, and one on the other.

Serie 30 profile with basis dimensions 60x60, and 8mm tracks. There are 2 tracks on all 4 sides. Large strong profile.

3030 profile that has been rounded on two of the sides, with 8mm tracks on the last two sides. Can be used on frames and enclosures.

Series 30 corner profile with 60mm sides, with one corner rounded. The profile is intended for corners and edges

Solid profile from anodized aluminum, intended to be used as a base plate, eg. in a CNC machine or similar. 1 and 2 meter.

If you want your profiles in a specific length, we can do that for you. Note in the order remarks the lengths you want in millimeters

Smart and solid joint for screwing 2 or 3 profiles together in a corner. Covers for holes included.

Angle bracket that sits inside the slot of the profile. It is easily tightened witha unbrako key.

Bracket for joining two 3030 profiles in a 90 degree angle. The cover hides the bolts and nuts, and gives a great finish.

Sturdy bracket in aluminium for joining two 3030 profiles in 90 degrees.

Large angle-bracket in cast aluminium for 6060 profiles in series 30, with two by two mounting holes.

Extra large angle bracket, that gives extra stiffness and strength in the connection, compared to standard.

Solid 45 and 135 angle brackets, that can be used for making triangles and octagons.

Strong bracket for mounting series 30 profiles to floor and wall. Bolted on between profile and surface.

Elements for making struts and other structural joints. Solid bases and brackets makes assembly simple.

Bracket that makes it easy to tilt / rotate a profile in relation to another. Can be used for adding struts.

Clever clamp that is used in 90-degree joints of two profiles. When this is used, the two profiles cannot twist and loosen the bolt.

Strong solid alu-bar that fits in to 8mm series 30 slots. The bar is tightened between two profiles to join them.

3-point bracket for assembling three rounded series 30 profils. A cover is included for hiding the brackets and joints.

Smart 6mm brackets for series 30 profiles, that are rotatable 45 or 90 degrees. They can be used for fixed, adjustable, and movable joints.

Extra strong bracket milled out of 4mm aluminium, that is annodised. The holes fit M6 bolts.

Flat brackets used for bolting series 30 profiles to series 40 profiles and vice versa, in various ways.

Flat brackets for 3030 profiles, in painted metal for outside joints of profiles. L and T-brackets available.

Tiltable arm for series 30 profiles. Can be mounted on the side or in the end of the profiles.

Hinges for series 30 in nylon and aluminium. Can be used for lids, movable parts and similar.

Wheel in hard plastic, that fits in to series 30 and 40 tracks (8mm). Can be used for securely guiding movable parts.

Simple mechanism for holding doors and similar closed. The two small balls will clamp around the other part. A good pull unlocks it.

Plastic-base that fits in series 30 and 40 profiles. A carabiner for hanging up items is included.

Plastic slider that fits in to the tracks of series 30 profiles, and can be used for guiding movable parts.

3 section drawer rail with ball bearings, and full extension. It can carry up to 20kg (pair). Easy to mount as the last section can be disconnected.

Extra strong drawer rail with bearings, and full extension. The drawer can carry 120kg in pairs. Easy to mount, as the last section can disconnect.

Nut that is put down in a series 30 track, and which turns and locks itself during fastening. Easy for assembly and disassembly. M4, M5, M6.

Nut that is pushed in to the end of series 30 profiles. Can easily be moved in the profile. Available with M6 and M8 thread.

T-nut that fits in to series 30 profiles. Can be pushed in to the slots anywhere. The spring in the bottom locks the nut.

Bolt that fits in to the 8mm slots of series 30 profiles. The bolt is turned 90 degrees in the slot, where after it can be tightened.

Connector that is screwed in to the end of a track on a series 30 profile. The included M5 bolt is put through and used for fastening.

Strong center-plate that can be bolted on to 3060 and 6060 profiles. There is a centerhole with threads, eg. for legs and wheels.

Wheel with or without lock-pedal. Can be used for movable tables and other objects that should be easy to move.

Strong and wide tiltable foot with threaded rod, with M8, M10 or M12 thread. Intended for system profiles, but is universal

Rubber foot with thread, that is vibration dampening. Typically used under machines with motion, eg. 3D printers.

Black plastic caps for the ends of series 30 profiles. Gives you a nice finish and closes the sharp edges off in the ends.

Cover for closing the tracks in series 30 and 40 profiles. Give a nice finish and avoids dust and dirt in the tracks.

A plastic profile / seal that fits in series 30 and 40 profiles. It can hold a 5mm plate inside the slot.

Cover strip with 10mm brushes, that fit series 30 and 40 tracks. Can be used for tightening, clean, guide and fix.

Solid fingerscrew / knob with M8 thread, and a hole all the way through. Can be used as handle, for fastening and similar.

Wing grip with M6 or M8 thread. The grip can be used for fastening profiles, brackets, arms etc.

Handle with thread, that is often used in a joint where there is often need to loosen and fasten a joint. M6 and M8 thread.

Black nylon handle that can be used for doors and lids. M6 fits series 20 and 30, M8 fits 30 and 40 profiles

Threaded rod with M6 thread, in fixed lengths, that can be used for fastening and other purposes.

Standard threaded rod with fixed length. Can be used for fictures and similar purposes.

Standard Vesa monitor bracket in solid anodized aluminum. Can be mounted directly on profiles, on bracket and arms.

Block that is inserted in to series 30 profiles. The bolt in the block can be used for tightening plates between profiles.

Locks a net to a series 30 profile. Is turned in to the track, and the net put through the hole and locked with pinol screw.

Simple holder for fence and net, that fits in to series 30 and 40 profiles. Clamps itself and the fence in the track.

Smart holder for fastening cables, air hoses and similar to series 30 profiles. Self-locking model and model for bolting.

Simple cable tie holder that can be put in to series 30 tracks. Easy and nice solution for fastening cables, hoses and similar.

Smart box that can be put down in the front edge of a series 30 profile. Can be used for components, tools or similar. 105 X 130 X 50mm

Magnets that can be fastened with countersunk bolts. The countersunk hole gives you a flush surface after mounting.

Magnet with thread in the middle. Can be used to fasten parts to the magnet.