T-track guide rails

Standard profile in our T-track system, that fits the sliders and t-nuts from the same system. 30 x 12.8mm op til 3 meter.

Small guide-rail for the T-Track system, that fits with various accessories. Measures only 17 x 12.5mm

Standard profile with space for a measuring tape, that can be used for positioning and measuring parts and fixtures.

Fence profile that fits with the fence bracket, and glider with adjustable angle. Used for positioning and moving parts in the machine.

If you want your profiles in a specific length, we can do that for you. Note in the order remarks the lengths you want in millimeters

Profile-element for making a cross with the profiles. The cutout in the middle fits the track in the profiles.

Slider with adjustable angle, intended to be used with the fence profile. Can be used for adjustable sled for table saw and similar.

Adjustable endstop for the fence profile, with locking handle. Marker for reading measuring tape.

End stop that fits into the standard profile. Can be used for making an adjustable end stop for a circular saw or similar.

Sliding stop for the fence profile, that fits into the standard profile. Used for setting up and fastening the fence profile. Two models.

Slider that fits in the standard profiles. For guides, fences, and jigs on machines. Built-in adjustment of slide. Two models.

Slider in plastic, that locks itself in the profile when the bolt is fastened.

Nut that fits in the tracks of the standard profile. Slides easily back and forth. For fixtures and jigs.

Bolt with head that fits down in to the track of the standard profile. It can be used for fixtures and jigs.

Sliding nut for the mini-track for fixing and fastening. Available with M4, M5 and M6 thread.

T-Bolts that fit into the smaller tracks that are in the fence profile, and in the bottom of the profile with measuring tape.

Complete standard clamp set with sliding nut, that fits in T-tracks. Easy to adjust and fasten with finger-nut.

Complete clamp with three-step spacer-foot and nut for T-track. With the foot you do not need a spacer.

Clamp that fits in the small tracks on the fence-profile, tape measure profile and the mini-profile.

Clamp that can be used for fastening and parts and fixtures. Made from solid aluminium and has plastic caps on the ends

Spacer washer that fits M6 bolts. Can be used together with T-bolts or self-locking slider, when fastening parts.

Solid fingerscrew / knob with M8 thread, and a hole all the way through. Can be used as handle, for fastening and similar.

Threaded rod with M6 thread, in fixed lengths, that can be used for fastening and other purposes.

Standard threaded rod with fixed length. Can be used for fictures and similar purposes.

Handle with thread, that is often used in a joint where there is often need to loosen and fasten a joint. M6 and M8 thread.

Wing grip with M6 or M8 thread. The grip can be used for fastening profiles, brackets, arms etc.

Complete set with 2 featherboards, bolts, gliders, spacers and finger-nuts. Fits in to T-track rails and the fence-profile.

Double adhesive tape in metal, that can be used for measuring fixtures / setups and parts.