4040 Profile system for construction

Standard profiles in 4040, with basis dimensions 40 x 40mm and 8mm slot. The profiles are an extra thick model.

Extra strong double-width series 40 profile with 8mm slot, that can be used as a basis frame in a larger constructon.

Alu profile in series 40, with 16mm height and one 8mm slot. Can be used for lids and other purposes, that only require one track.

If you want your profiles in a specific length, we can do that for you. Note in the order remarks the lengths you want in millimeters

Smart corner-joint that is used for screwing two or three profiles together in a corner, eg. in a box. Covers for the holes included.

A bracket for connecting to profiles of 90 degrees. It is made of a solid aluminum.

Extra large brackets in cast aluminium that gives you extra stiffness compared to standard bracket. Mounted with 4 bolts.

Strong bracket for mounting a supporting profile in a corner. The triangle joint will give you maximum stiffness between two profiles.

Turnable Bracket for series 40 profiles, that makes it easy to angle a profile when it needs to be mounted to another profile.

Solid brackets in aluminium that are angeled on 45 and 135 degress. Used for triangles and octagons.

A strong aluminium-bar that fits in to series 40, 8mm slots. 4 large bolts tightens the two profiles securely together.

An inside-bracket for joining two profiles in a 90 degree angle.

Block with a nute, that fits in series 40 profiles. Allows you to eg. bolt a plate or similar to the profile.

Bracket for fastening a series 40 profile to floor or wall. The bracket is bolted on to the profile and the surface.

Extra strong brackets for 4040 profiles, milled out of 6mm aluminium, that is anodised. The holes fit M8 bolts.

Flat brackets in painted metal for outside joints of profiles. L and T-brackets available. M8 holes.

Smart 6mm brackets, that are rotatable 45 or 90 degrees. They can be used for fixed, adjustable, and movable joints.

Standard Vesa monitor bracket in solid anodized aluminum. Can be mounted directly on profiles, on bracket and arms.

Nut that fits in to series-40 profiles, where after you can put in a bolt. This nut turns itself in to position when tightened,

T-nut that can be pushed in to the tracks on series 40 profiles. The spring avoids it gliding and falling out again.

A nut that is pushed in to the end of a 40-series profile, where after it can be pushed in place. M3, M4, M5, M6 or M8 thread.

Metal piece that prevents that a profile fastened with a bolt in the end, can be twitsted loose.

A hammer-bolt with M8 thread that fits in to Series 40 profiles. Used for easy mounting to the profile.

Screwed in to the end of a track on a series 40 profile, where after the included bolt is put through and used for fastening.

Threaded rod with M6 thread, in fixed lengths, that can be used for fastening and other purposes.

Standard threaded rod with fixed length. Can be used for fictures and similar purposes.

Plastic and aluminum hinges, that can be used for doors and lids. The hinge is fastened with M6 bolts.

Wheel in hard plastic, that fits in to series 30 and 40 tracks (8mm). Can be used for securely guiding movable parts.

Smart roller-element module that is clicked on to a series 40 profile. Can be used for building gliding tracks or similar.

Simple mechanism for holding doors and similar closed. The two small balls will clamp around the other part. A good pull unlocks it.

Tiltable arm in aluminium that can be mounted between two profiles.

3 section drawer rail with ball bearings, and full extension. It can carry up to 20kg (pair). Easy to mount as the last section can be disconnected.

Extra strong drawer rail with bearings, and full extension. The drawer can carry 120kg in pairs. Easy to mount, as the last section can disconnect.

Plastic-base that fits in series 30 and 40 profiles. A carabiner for hanging up items is included.

Wheel with or without lock-pedal. Can be used for movable tables and other objects that should be easy to move.

Strong plate that is bolted on to the end of 4080 profilesm where there is M12 thread in the middle, eg. for legs and wheels.

Strong and wide tiltable foot with threaded rod, with M8, M10 or M12 thread. Intended for system profiles, but is universal

End-caps for Series 40 profiles. Simply pushed in to the end of the profiles, where after the sharp edges are covered.

Cover for closing the tracks in series 30 and 40 profiles. Give a nice finish and avoids dust and dirt in the tracks.

A plastic profile / seal that fits in series 30 and 40 profiles. It can hold a 5mm plate inside the slot.

Cover strip with 10mm brushes, that fit series 30 and 40 tracks. Can be used for tightening, clean, guide and fix.

Large handle for series 40 profiles. The Ø30mm alu-tube can be cut off and is then put into the ends, which are fastened with M8 bolts.

Solid fingerscrew / knob with M8 thread, and a hole all the way through. Can be used as handle, for fastening and similar.

Wing grip with M6 or M8 thread. The grip can be used for fastening profiles, brackets, arms etc.

Black nylon handle that can be used for doors and lids. M6 fits series 20 and 30, M8 fits 30 and 40 profiles

Handle with thread, that is often used in a joint where there is often need to loosen and fasten a joint. M6 and M8 thread.

Holder for net / fence, that fits in to a series 40 profile. The holder works as a hammer bolt, but has a hole for the fence wire to fit in to

Simple holder for fence and net, that fits in to series 30 and 40 profiles. Clamps itself and the fence in the track.

Holder with clamps for fastening cables, hoses and similar to series 40 profiles. Model for M4 bolt, and self-locking model available.

Holder for cable ties, that fit down in to series 40 tracks. Makes it easy to fasten loose cables, hoses etc.

Magnets that can be fastened with countersunk bolts. The countersunk hole gives you a flush surface after mounting.

Magnet with thread in the middle. Can be used to fasten parts to the magnet.