SMD LED rope lights

A nice flexible SMD LED Rope Light that gives a stronger light than our normal rope lights, however only in one direction.

A flexible Rope Light for 24V that creates a bright light. It is made of LED stripes encapsulated in solid plastics. For outdoor use.

Complete starter-pack with a waterproof transformer, a connection cable, clips and an endcap. Available for 5 to 30 metres rope light.

Cable and a connector for the SMD Rope Light.

Rubber end caps to be fitted at the end of the rope light.

Clips in a hard plastic to be attached to the SMD Rope Light. It is being mounted easily with two screws.

A flexible cable for connecting two Rope Lights. It can be used to combine several lenghts or for making angles.

Angle-joint that is used for making corners with SMD Rope Light. The angle and 2 connector-plugs are included.

Same pins that are in the connectors. Used when the included break, or if you loose them.

Gives you secure and waterproof joints between the wires. You can heat it until the solder melts and the crimp closes around the wires.

Junction box with 2, 3 or 4 cable units. There are seals on all openings, making it IP68 (max. 4 metres depth).

Non-dimmable transformers that are connected to 230VAC on the input with screw terminals and to 12VDC on the output.

12V transformers in waterproof enclosures. Models from 50W to 250W. A solid construction with potted electronics.

Waterproof 24V transformers from 50W to 300W. Solid constructions with potted electronics.