LED Fiber Sky

Our LED light guide set is different from the conventional light guide set as they are built with a very powerful LED light source instead of a large halogen bulb. Therefore, the power consumption is much less, and the light source is not particularly warm.

Via the supplied wireless RF remote control you can easily control the brightness and on/off functions, and by RGB models - set different light colors.

LED fiber emitters are much more efficient that Halogen-emitters, as they use less power and generate considerably less heat.

Light emitter remembers your last setting, so if the power fails, the light emitter will even start up again at the last setting, when the power is connected again. 

Do not use superglue

Do not use superglue / cyanoacrylat as it will corrode and ruin the fibers. Use a silicone glue instead.

Mounting

Mounting is very straight forward:

• Drill holes that match the dimensions of the fibers. 
• Put the fibers in to the holes, and avoid bending them. If you bend them it might be necessary to cut them.
• Glue the fiber, so it cannot fall out of the hole.
• Cut excess fibers from the surface.