A constant-current RGB + White controller that is controlled by the wireless T4 remote. An intelligent controller with many functions and possiblities. Used for 1W, 3W and 5W LEDs.
The constant current sends out a fixed current to the LED light source that is connected. This is typically used for high power LEDs connected in sequence. The current is easily set by using the small DIP switch in the input port. You can choose between 350mA, 700mA and 1050mA. The controller needs a high voltage to drive the LEDs. This is caluclated by the voltage drop of the LEDs. The controller needs a minimum of 12VDC and a maximum of 48VDC.
You can use this controller for RGB+White LEDs or for fixed-color LEDs in the four colors, or RGB LEDs combined with white LEDs.
There are screw-terminals both on the input and on the output for easy connecting.
The controller works with T4 remotes. Pairing the remote and the controller is very simple. Push the "Adress setting" button on the controller, then push the remote right after.
There is only an English manual included, as the product is very technical, but we are always available for assistance.
A constant-current RGBW controller that is controlled by the wireless T4 remote. For 1W, 3W and 5W LEDs.
Vis fuld beskrivelse
