Gylle Warm White / Red LED Marker Light -12V-24V

The classic Gylle LED marker light with a rubber base and light sources in warm white and red colors. The light sources are pressed into the base in such a way that you can yourself make a right lamp and a left lamp. The light sources are of course E-approved and thus also the entire marking lamp.

There are 6 powerful LEDs in each light and a 6 metres cable on the back that can be put through the rubber base.

A long model

The base has an overall length of 195mm and the light sources have a diameter of 61mm when they are inserted. The head of the base has a diameter of 80mm.

The mounting surface is 100 x 50mm and it has a 6 pre-drilled holes in the metal plate at the bottom.

A short model

The base has a length of 110mm and the light sources have a diameter of 61mm when mounted. The head is the same size, as that on the long model with 80mm diameter.

The mounting surface has the same holes and hole spacings as on the long model, however the base is a little smaller with 95 x 48mm.