Switches and contacts for 24V

Updated model of our waterproof (IP67) on/off and push-on breaker / switche with and without LED indicator lights for 12V or 24V.

Nice small waterproof switch in a stainless steel that fits in to a 12mm hole.

A nice switch with a rubber-cap that is waterproof (IP65). The switch is available as on/off button and as a push-on button.

A simple switch that can be activated when a door or drawer is being opened. To be mounted under a shelf or on a wall.

Choose between on/off and push on surface-mounted switch with double adhesive tape. Used for eg. motorcycles where you cannot mount a standard switch.

Switch with various functions, in black or in white plastic. It can be used for 12V, 24V and 230V. Panel-mounted in 21mm hole.

Simple waterproof 1-pole switch that can be used for 12V, 24V and 230V. A rubber-cape seals the switch when it has been panel-mounted.

Nice toggle-switch with a colored plastic-button that lights up when the switch is on. Available in red, green, blue and yellow.

Simple switch that can be mounted on a wire for example - the wire of a lamp.

1 pole mini switch. Max 4 Amps 12V/24V. Available with or without a 50cm soldered on wire .

Switch that is triggered by a pull of the string. It is typically used in cabinets, closets and places with recessed light. 25cm cord included.

A wireless relay-controller for 12V or 24V with a 1-channel / output. Remotes are bought seperatly The 3 built-in functions give you many possibilities.

A relay-controller for 12V or 24V with 4 channels, which are set by a wirless remote. Remote control has to ordered separatly The 3 built-in functions give you many possibilities.

A simple relay with one pole/switch that is closed when the relay is powered. It can be used for turning on lights etc.

Two-pole switching relay for 12V, 24V and 230V, that can turn on and off two signals simultaneous. Eg. for switching motor direction.

Silent relay that is used for many or very fast activations, where a mechanical relay is not optimal.

Relay with temperature sensor, that activates depending on measured and set temperature, function and hysteresis.

Simple latching relay that change setting on pulse in the input. It is typically used for controlling a relay from multiple switches.

Standard relay with one pole, for mounting on DIN rail. Available for 12V, 24V and 230V AC / DC input.