Lamp parts and sockets

Socket for E14 bulbs. The socket is easily taken apart, where after you can use the screw-terminals to connect a cable.

Socket for E27 bulbs. The socket is easily taken apart, where after you can use the screw-terminals to connect a cable.

Loose socket to suit most types of 12V halogen bulbs with pin sockets. ØxL - 28x15mm.

G9 socket in ceramics with premounted wires. Easily mounted with 2 screws in the base of the socket.

Socket for G9 bulbs. The cables are put in to the holes in the base, where after the cover is clicked on.

Loose socket for GU10 bulbs. An easy fastening with 2 screws. ØxL: 28x15mm

Simple canopy in plastic for hiding the lamp fitting or the cable mount on the ceiling. It is available in white or black.

Strain-relief that is screwed on to the end of the sockets, so that the wires in the screw-terminals have no strain.

Plastic nut that fits in a G9 base. It can, for example be used for mounting the base in a hole or for a lamp screen.

Hollow threaded pipe that is used for bulb sockets with M10 thread. The socket can be fastened with the thread and the wire can be feeded through.

A nut that is intended for pipes with M10 threads, where they are used to secure pipes mounted in to bulb-sockets.

HIgh quality BA15s base, for mounting in 26mm hole. Gasket for waterproof sealing against the lamp.

Base for BAY15D bulbs, with wires for connection. Gasket secures a waterproof joint in a 26mm hole.

A socket for BAY15D bulbs, where there are two pins on the bottom and the taps on the side are shifted.

HIgh quality BAU15s base, for mounting in 26mm hole. Gasket for waterproof sealing against the lamp.

A simple socket in metal that matches BA9s bulbs.

A black socket in plastic that fits BA9s bulbs. The cable lugs on the bottom makes it easy to connect.

W5W socket made of rubber, that is pushed in to a fitting 12mm hole. The rubber closes around the hole and the bulb.

Smart bulb adapter with wires that make it possible to use the power from various bulb fittings.

Special GU10 to G4 adapter. Only for 12~24V

A special E14 to G4 adapter, which is typically used in the process of LED conversions in campingvogns, boats and other vehicles.

A special E27 to G4 adapter, which is typically used in the process of 12V LED conversions in campingvogns, boats and other vehicles.

An adapter converting E27 socket to GU10 socket, so that you can screw GU10 bulbs in to a E27 lamp.

Cable with a 230V plug that can be used for connecting lamp sockets or power supplies.

White or black cable with a premounted 230V plug anda toggle breaker. The cable is 1.5 metres long and can be used for lamps.