Nice square LED taillamp with rear-light brake-light, dynamic indicator-light reverse-light, fog-light and licenseplate-light on the side. The built-in voltage regulator allows you to connect it to both 12V and 24V, that gives you a lot of possibilities.
The lamp is ADR/ECE approved for legal road use.
The lamp has a 2 year waranty and is completely waterproof (IP67)
The model is equipped with dynamic indicator-light in LED, that can be found on modern carmodels, and also normal break- and rearlight in LED. On the lamp there is a 6 meter long wire in black
The special thing about the model is, that it is equipped with dynamic indicator-light in LED, that can be found on modern car-models.
Essembly:
The lamp is easily mounted using the two built-in bolts on the back of the lamp and supplied nuts and washers.
Connection
- White = Ground
- Red = Stop light
- Black = Position light
- Yellow = Direction indicator light
- Blue = Fog light
- ​Grey Reversing light
Keep in mind that on newer cars there may be challenges if you change your old tail lights to LED tail lights.
The lower power consumption may cause the car to believe that the bulbs are defect or the car will cause the lights to flash.
In some cases, this problem can be cached at an authorized workshop, but you may also need to use interference resistors on the features that the car is failing.
Nice square LED taillamp with rear-light, brake-light, dynamic indicator, reverse-light, fog-light and licenseplate-light. For both 12V and 24V.
Vis fuld beskrivelse
